Air Barrier System – TMC 2000
TMC 2000 is a fluid applied vapor permeable/air barrier membrane. It’s monolithic membrane is designed to be applied to above-grade exterior wall assemblies to prevent air and water infiltration, while remaining permeable to the passage of water vapor. TMC 2000 monolithic system provides a prime less adhesion allowing the designer more flexibility in the placement of the air barrier system.
TMC 2000 provides a flexible infiltration barrier against air and moisture. It eliminates the penetrations that building paper and house wrap installation require. TMC 2000 is 100% tight against the surface with NO SEAMS. Therefore it prevents moisture from forming on the sheathing. TMC 2000 air barrier system forms a seamless coating from the exterior into window and door openings. It is not affected by ultraviolet rays, and contains no aromatic hydrocarbon solvents or aliphatic petroleum naphthas.
A fluid applied alternative to common house wrap materials. For OSB or plywood materials on new & existing construction. Use for both commercial and residential applications.
Completely water-based • Suitable For OSB and Plywood • UV Resistant
TMC 2000 meets or exceeds the following ASTM tests:
►ASTM C 836 – Adhesion strength
►ASTM 836, Sec. 6.7- Low temperature flexibility
►ASTM E 154 – Resistance to decay
►ASTM D 3273-94 – Resistance to mold growth
►ASTM D 2939 – Resistance to water action
►ASTM 836, Sec. 6.9 – Vertical adhesion during application, ability to remain in place
►ASTM C 836 – UV Fastness
►ASTM C 1306 – Resistance to water under pressure
►ASTM E 96 – Water vapor transmission, permeance